Why is it important to avoid mistakes in bathroom renovation?
Why is it extremely important to approach this issue as responsibly as possible? Making mistakes when renovating a bathroom can lead to the following troubles in the future:
- the appearance of leaks and flooding of neighbors - when renovating a bathroom, it is necessary to make high-quality plumbing wiring and waterproofing the bathroom in the floor segment;
- damage to electrical wiring - installation of low-quality wires and devices without moisture protection is not allowed;
- mold and fungus - ill-considered waterproofing of the bathroom, poor thermal insulation of walls, improper ventilation and lack of protection against leaks lead to the appearance of microorganisms harmful to human health;
- violation of bathroom ergonomics - optimal planning of the bathroom or a separate bathroom allows you to conveniently place plumbing elements and household appliances.
Most often, repairs of this room are carried out with the calculation of the duration of operation for 10-15 years. Poor-quality bathroom tiles and improper installation will cause the tiles to begin to deform after just a few years. Therefore, the main focus should be on common bathroom renovation mistakes, which will be discussed in more detail below.
What are the typical mistakes when renovating a bathroom?
To prevent critical problems, experts recommend paying attention to the following points:
- Communications and plumbing
With a hidden access format to pipes, you cannot tightly sew up risers and meters. It is extremely important to make inspection hatches to get quick access to the right place in case of a leak in the bathroom. Another mistake when repairing a small bathroom is the wrong slope of the sewer. In this case, water will stagnate, and an unpleasant odor will appear in the room.
- Waterproofing under tiles
Ignoring the insulation layer when preparing walls for tiles or applying it superficially will lead to water seeping through concrete floors. It is better to work with moisture insulation during the process of leveling the walls in the bathroom, thus preventing the appearance of mold.
You should not be limited to natural ventilation - you need to take care of an additional so-called forced format. For this purpose, special systems are used, which are installed even before laying the tiles in the bathroom.
Another typical mistake during bathroom renovation concerns the formation of the electrical network and lighting. Most often, this is an insufficient number of sockets, poor-quality wiring insulation, lack of protection against moisture. It is advisable to think over the design of the bathroom in advance, planning multi-level lighting.
How to avoid mistakes when renovating a bathroom?
Drawing up an estimate, which will include a planned budget and a phasing of work, is advice that is worth heeding if you do not want to make common mistakes during the work process. After all, repairing even a small bathroom will be extremely expensive if it has to be redone later.
Therefore, you should not save on materials by buying the cheapest ceramic tiles. In no case should you ignore the installation of waterproofing. Choose porcelain stoneware, tile adhesive, grout, etc. only from proven manufacturers.
If necessary, entrust the calculations and main stages of the work to experienced specialists - this will save you from potential errors and miscalculations.
