Calculator

Industrial concrete floors in Kyiv and Kyiv region

Concrete is one of the most inexpensive building materials, working with which does not require special skills. Therefore, concrete flooring is considered extremely beneficial in construction and renovation from the point of view of many aspects.

Its main characteristics are ideal strength, increased service life, excellent resistance to chemicals and the possibility of prolonged exposure to mechanical and natural factors.

Industrial concrete floors are poured using special technology. Work can be carried out both on the ground and on the existing cement coating.

To create an appropriate design solution, it is very important to first take into account the potential loads on the future foundation. Calculations of this kind are usually carried out by specialists.

Industrial concrete floors in Kyiv and Kyiv region

Industrial concrete floors

How do we do it:

How an industrial concrete floor is poured: nuances of technology

Preparatory work includes soil monitoring and calculation of the height of the thermal cushion. The last parameter depends on the groundwater line and the degree of freezing of the ground. The algorithm for further actions is as follows:

  • backfilling the bottom layer in the form of sand, followed by compaction using a vibrating roller;
  • laying crushed stone or gravel with layer-by-layer compaction;
  • installation of waterproofing material to ensure dryness of the base;
  • reinforcement - at this stage, reinforcement with a diameter of at least 5 mm is used, and the cell size should be 100x100 or 150x150 mm;
  • mixing the construction mixture and laying it - a concrete industrial floor requires the use of concrete of a grade not lower than M300, with the exception of impurities of salt components.

The material is poured over the entire prepared plane, with parallel leveling and compaction. Upon completion of this process, you should pause in work to create the required plastic strength. Next, the hardened layer is processed with a special trowel. If necessary, topping is applied.

Grouting must be done in several passes. As a result, the surface becomes even and smooth. Next, varnish is applied to the finishing screed and shrink joints are cut.

Industrial concrete floor: price and basic requirements

This type of coating is the best option for various organizations, areas of production workshops, and industrial buildings. Industrial floors are also used in the logistics sector; they are also needed in the open air - at airports, in parking lots, parking lots, on bridges, in tunnels and much more. They can be filled almost at any time of the year, but certain technological conditions must be observed:

  • ambient temperature ranges from +5 to +25 degrees;
  • air humidity level should be approximately 60-80%;
  • protection from drafts;
  • absence of dust and direct sunlight.

If an industrial concrete floor is formed on top of an old coating, then you first need to remove large grooves and cracks by pouring a special composition. For large areas of damage, it is advisable to carry out segmental repairs. A so-called contact layer should also be applied to the base prepared in this way, with the help of which the bottom and top coatings are “glued together.”

Technologically, industrial concrete floors, the price of which depends on many factors, provide for some other details. Despite its apparent simplicity, this process is quite labor-intensive and physically complex. In addition, errors made during installation can lead to unpredictable consequences and the need for major repairs in the future.

Therefore, in order to avoid sad consequences, it is best to entrust the work of installing concrete floors to experienced specialists.

How do we do it:

Відгуки

RСC ALBA - renovation of an apartment in Kyiv on the street Polar

5/ 5

2024-06-26

More

RСC ALBA - Construction of a fence from the decorative block TM "Golden Mandarin" in the city of Irpin

5/ 5

2024-05-22

More

RСC ALBA - laying paving slabs in the village of Lisne

Everything is fine! Everything was fast. I'm happy.

5/ 5

2024-04-14

More

RСC ALBA - remote support for the project of a private booth near the metro station Krivy Rig

We contacted the company to create a project "from scratch". The project was carried out remotely. There were no difficulties in communication. All our wishes are taken into account. I recommend these professionals to everyone.

5/ 5

2024-03-25

More

RСC ALBA - execution of industrial flooring in Kotsyubynsk

The work is done perfectly. The guys do everything in a timely manner and with high quality. We will continue to work with them. We are glad.

5/ 5

2024-02-07

More

Renovation of a kindergarten in Kyiv

I would like to note 3 main and most important factors after working with Oleksii: 1. Pricing policy - fully invested in the budget that was expected. 2. The quality of work is impeccable. 3. Deadlines - everything turned out clearly and within certain deadlines. Therefore, I recommend the company. We are satisfied.

5/ 5

2024-01-28

More

RСC ALBA - decoration of the facade of the house in the village of Khotyanivka

Many thanks, Oleksiy Oleksiyovych, everything is very prompt, very responsible guys. There will be pennies - we will apply again. thank you

5/ 5

2023-10-24

More

RСC ALBA - paving + paving slabs + retaining wall + fence

I want to say that God sent you to me. Your people are specialists, they do it quickly and efficiently. Thank you very much.

5/ 5

2023-10-24

More

Construction of a turnkey farm block in the village of Rozhny, Kyiv region

The company built a turnkey farm block in the village of Rozhny, Kyiv region. Paving tiles were also laid, garbage was removed. I recommend)

5/ 5

2023-08-25

More

RСC ALBA - Carport roofing in the village of Sviatopetrivske, Kyiv region

The polycarbonate roof was replaced with corrugated sheets, the sides were made with PVC, everything was done with high quality, it was done conscientiously. Thanks to the company, thanks to the employees. I recommend!

5/ 5

2023-08-25

More

Оцінка 5 базується на 31 відгуках клієнтів

FAQ:

What work is performed during the installation of industrial floors?

  • Excavation and removal of soil (if necessary)
  • Compacting the earth
  • Laying crushed stone-sand mixture with compaction
  • Film laying
  • Laying damper tape around the perimeter of the building (or installing formwork if there is no building)
  • Reinforcement
  • Concrete acceptance
  • Applying topping
  • Grouting concrete
  • Cutting seams and filling with sealant (or herringbone)

What kind of concrete work do we do?

  • foundations for houses
  • armored belt
  • foundations for fences
  • blind areas
  • monolithic floors
  • monolithic structures
  • retaining walls
  • industrial floors
  • stairs

Our works: Industrial concrete floors.

View our works

Find out the preliminary cost of the work:

The cost is calculated approximately taking into account the full package of services and the volume specified by you.

A more accurate price will be possible to find out after arriving at the object itself.

The price is affected:

  • - object location;
  • - number and complexity of work;
  • - what material and what technology to work with;
  • - number of preparatory, handling and logistics costs;
  • - due date (compressed or uniform);
  • - prices for building materials;
  • - working time (day / night / around the clock);
  • - ordinary or cramped conditions / work at height;
  • - the presence of good weather;
  • - no interference from external factors (war, strike, blocked streets, significant price increases, natural disasters);
  • - customer decision-making speed;
  • - coherence of work with other contractors;
  • - timely acceptance and payment of work performed.



Choose another service

Проектирование и дизайн

Close