DIY Garage Repair

Features of garage repair

The process itself requires the need to correct the external finish, replace the internal one, check the functionality of the garage doors and the condition of the roof. It begins with an inspection of the structure - in order to identify and eliminate problem areas. As a result, you can make a rough plan for repairing the garage. Often, Ukrainians use this room not only for parking a car, but also as a place to store all sorts of things, objects and supplies for the winter. Therefore, it is important to think in advance about reorganizing the interior space so that you can compactly install cabinets, use the hollow part of the walls for shelves. At the same time, you will not have to spend a lot of money - you will find original ideas for such an arrangement on the sites of the World Wide Web.

DIY Garage Repair: How to Update Walls

The most important stage of repair work is considered to be finishing of floors and walls. If in the first case concrete pouring is done - when it is necessary to correct the surface, then in the second case the choice of materials used will be more diverse. The selection must be taken responsibly, since a lot of flammable substances are stored in the garage, and the probability of sparks is very high. Therefore, experts recommend choosing materials with a low degree of flammability and good resistance to mechanical damage and chemicals for do-it-yourself garage repairs. The following are among the most suitable:

• Plaster. Cement and sand are used as a basis here, due to which a durable layer is formed on the surface after drying. Then the walls can be covered with moisture-resistant paint for outdoor work.
• Ceramic tiles. This is a more expensive option, but it provides excellent aesthetics and durability. In addition, its characteristics fully meet the requirements of fire resistance and maintenance.
• Clapboard. It implies the simplest and most affordable method of finishing interior walls with your own hands. Even a non-professional can handle the installation. Fastening the panels does not require any special tools, and the process can be completed in just a couple of hours. As a rule, facade paneling is used in garage repairs.

If you plan to insulate the room, it is better to use foam plastic or glass wool. The material is laid before the cladding work. Compartments are created for the wool from wooden beams or metal profiles. Foam sheets are attached using plastic mushrooms (umbrellas).

DIY Garage Door Repair

A common format in modern garages is sectional. Such gates are distinguished by a vertical opening method, have panels connected to each other by hinges. This design is quite durable and safe to operate. To ensure its integrity and operability, you should pay attention to the following points:

• the surface of the gate - it should be flat and smooth;
• absence of cracks and fractures;
• vertical deviations - the norm is considered to be no more than 5 mm.

In addition, the condition of the lintel above the opening is taken into account. It should be in the same plane as the wall.